Ranger Boat Livewell Operation

Ranger Boat Livewell Operation - When you get your first keeper switch toggle to auto and hit the first fish button. So they will be pumping. Dad has a 2007 ranger z21. Very little water will trickle out of livewell when pumps turned on. Noticed the blinking lights on dash for aerator. Didn't find any loose connections. I’ve read the manual, had the boat on the water, discussed with the dealer and i still don’t fully understand it. Just now filled the livewell and baitwell and tested each switch. There is no adjustment to the timer setting, although some other ranger models past and present have had timer adjustments. You fill the livewell with outside water by. To fill, you turn the selector on the side panel to “auto” and then push the third button down on the left row, the one that shows a fish swimming in water. That will fill and run. Auto on the valve fills livewell. Recirc recirculates the water already in the well. The two switches on the dash activate the pumps. Rather than suck it out of the bottle, why not drain out the water then set the dials to recirculate, dump marine antifreeze into the livewells then turn on the pumps until the anti. This patented system not only allows fresh water to be pumped in through the aerator supply line(s), but also permits recirculation and aeration at any speed of boat operation. I have a 2025 ranger rt178c and it has two livewells (fore and aft) and several controls for each. I'm not sure what all the controls are for and what to use when on the water. Start the day with the livewells empty and set to recirculate.

When you get your first keeper switch toggle to auto and hit the first fish button. So they will be pumping. Dad has a 2007 ranger z21. Very little water will trickle out of livewell when pumps turned on. Noticed the blinking lights on dash for aerator. Didn't find any loose connections. I’ve read the manual, had the boat on the water, discussed with the dealer and i still don’t fully understand it. Just now filled the livewell and baitwell and tested each switch. There is no adjustment to the timer setting, although some other ranger models past and present have had timer adjustments. You fill the livewell with outside water by. To fill, you turn the selector on the side panel to “auto” and then push the third button down on the left row, the one that shows a fish swimming in water. That will fill and run. Auto on the valve fills livewell. Recirc recirculates the water already in the well. The two switches on the dash activate the pumps.